Dinghy Rings Flex - Pivot up Davit for Inflatable Boat

Dinghy Rings FLEX, for inflatable dinghies, is hung over the transom, bow or side of a boat. No installation or drilling in the boat is needed. The off-white EVA-foam spacers protects the transom and make it possible for the rings to rotate freely. Dinghy Rings FLEX is adjustable in height and fits almost any boat. The accessory can be taken apart for storage and is designed for fast installation. It hangs in two-piece straps from the pushpit. Dinghy Rings FLEX supports inflatable dinghies up to 50 kilos (110 lb) and 2.8 meters (110 in). Adjustable in width to fit dinghies of different sizes. The distance c/c between the tubes shall be 102-127 cm (40.2-50 in). If your dinghy has flat tube ends instead of pointy ones, you need our accessory Pontoon LINK. Instructions for use: Reverse the dinghy astern of your boat, place the rear ends of the dinghy’s pontoons in the rings, secure the dinghy and pull to lift it as the rings rotate. It hoists your inflatable in harbour or while cruising and suits almost any motorboat or sailing yacht. Package weight: 7.6 kgs (16.8 lb) Package size: 800x400x180 mm (31.5x16x7 in) Dinghy pontoon c/c distance: 102-127 cm (40.2-50 in) Dinghy width approximately: 137-172 cm (52-67.7 in) Dinghy recommended max length: 280 cm (110 in) Max load (incl outboard): 50 kgs (110 lb) Recommended outboard: 2-4 HP Material: Stainless steel pipes AISI 316L 30/25 mm. UV-resistant polyester straps with marin grade buckle. EVA foam spacer wheel. Application: Hangs from pushpit, for transom without external swim platform

• Detachable, Easy to use, no installation, drilling or damage to boat
• Quick to launch the dinghy, Handled by one person
• Easy to walk by the standing dinghy and no risk for flooding
• A small motor can be kept on the dinghy under certain circumstances
• Simple and clever design to fit the dinghy tubes